DINCurrentDraft · single source

DIN 1445

Clevis pins with head and threaded stud

National equivalents

PN 83007

Tolerance: 6g
Materials: Steel

Dimensions

mm · values as the standard states them

Size	s	kfit js14	b	r	d2	d3fit h14	l2fit js15	z2
8	11	3	≥ 11	0.6	M6	14	Mass	≈ 1
10	13	4	≥ 14	0.6	M8	18	Mass	≈ 1
12	17	4	≥ 17	0.6	M10	20	Mass	≈ 1.6
14	19	4	≥ 20	0.6	M12	22	Mass	≈ 1.6
16	22	4.5	≥ 20	0.6	M12	25	Mass	≈ 1.6
18	24	5	≥ 20	1	M12	28	Mass	≈ 1.6
20	27	5	≥ 25	1	M16	30	Mass	≈ 2
22	30	5.5	≥ 25	1	M16	33	Mass	≈ 2
24	32	6	≥ 29	1	M20	36	Mass	≈ 2
27	36	6	≥ 29	1	M20	40	Mass	≈ 2
30	36	8	≥ 36	1	M24	44	Mass	≈ 2
33	41	8	≥ 36	1	M24	47	Mass	≈ 2
36	46	8	≥ 39	1	M27	50	Mass	≈ 2
40	50	8	≥ 42	1	M30	55	Mass	≈ 2
45	55	9	≥ 45	1	M33	60	Mass	≈ 2
50	60	9	≥ 49	1	M36	66	Mass	≈ 2
55	65	11	≥ 52	1	M39	73	Mass	≈ 3
60	70	12	≥ 58	1	M42	78	Mass	≈ 3
70	80	13	≥ 61	1	M45	90	Mass	≈ 3
80	90	13	≥ 68	1	M52	100	Mass	≈ 3
90	100	13	—	1	M56	110	Mass	≈ 3
100	110	13	≥ 84	1	M64	120	Mass	≈ 3

Ranges read min – max; ≤ / ≥ where the standard gives one limit, ≈ for approximate values. Sizes in (brackets) are non-preferred. Select a row for its size sheet.

Size sheet · DIN 1445

s: head width; 36
k: head height (fit js14); 8
b: length of the thread; ≥ 36
r: 1
d2: the nominal diameter of the thread; M24
d3: head diameter (fit h14); 44
l2: (fit js15); Mass
z2: taper; ≈ 2

Provenance

Draft — values taken from a single source and not yet cross-checked.

fasteners.eudimensions, lengths, materials, property classes, current norm, equivalent norms

Accessed 2026-09-23 · For design and safety-critical use, consult the current edition of the standard.

Data notes (1)

1 value(s) omitted after consistency checks: 90 b: value 7 breaks the size progression — omitted as a probable source typo

Same product type

ISO 2340 — Clevis pins without head ISO 2341 — Clevis pins with head DIN 1443 — Clevis pins without head DIN 1444 — Clevis pins with head All 5 standards of this type →

Dimensions

Help verify the next 50 standards.