DINCurrentDraft · single source

DIN 71412 A

Grease nipples, taper type — Form A — straight

Tolerance: 6g
Property classes: 5.8A4
Materials: SteelStainless

Dimensions

mm · values as the standard states them

Size	P	s	h
M6x1	1	9	≤ 16
M8x1	1	11	≤ 16
M10x1	1	14	≤ 16

Ranges read min – max; ≤ / ≥ where the standard gives one limit, ≈ for approximate values. Sizes in (brackets) are non-preferred. Select a row for its size sheet.

Size sheet · DIN 71412 A

M8x1

s: size hex head turnkey; 11
h: height grease nipples; ≤ 16

Thread · ISO 261/262

Pitch P: 1
d2: 7.35
d3: 6.773
Tap drill: 7
Stress area A_s: 39.17 mm²

Provenance

Draft — values taken from a single source and not yet cross-checked.

fasteners.eudimensions, lengths, materials, property classes, current norm, equivalent norms

Accessed 2026-09-23 · For design and safety-critical use, consult the current edition of the standard.

Same product type

DIN 71412 B — Grease nipples, taper type — Form B — 45° angled DIN 71412 C — Grease nipples, taper type — Form C — 90° angled All 3 standards of this type →

Dimensions

Help verify the next 50 standards.