Maße mm · Werte wie in der Norm angegeben Größe P t b1 b2 d2 d3 z2 M24 3 —
75
110
—
—
14
M30 3.5 —
85
120
—
—
18
M36 4 22
95
140
—
M12
22
M42 4.5 22
105
150
34
M12
25
M48 5 22
120
160
38
M12
28
M56 5.5 26
140
170
45
M16
32
M64 6 26
155
190
50
M16
36
M72 26
170
200
55
M20
40
M80 33
185
220
65
M20
45
M90 33
205
240
70
M20
50
M100 33
225
260
80
M20
56
Bereiche als min – max; ≤ / ≥, wenn die Norm nur eine Grenze nennt, ≈ für Näherungswerte. Größen in (Klammern) möglichst vermeiden. Zeile wählen für das Größenblatt.
Größenblatt · DIN 797
M24
b1 length of the thread (at least) 75
b2 length of the thread (at least) 110
z2 length of the ejector 14 Gewinde · ISO 261/262
Steigung P 3
d2 22.051
d3 20.319
Kernloch 21
Spannungsquerschnitt As 352.5 mm² Größenblatt · DIN 797
M30
b1 length of the thread (at least) 85
b2 length of the thread (at least) 120
z2 length of the ejector 18 Gewinde · ISO 261/262
Steigung P 3.5
d2 27.727
d3 25.706
Kernloch 26.5
Spannungsquerschnitt As 560.59 mm² Größenblatt · DIN 797
M36
t the depth of the hole (is not less than) 22
b1 length of the thread (at least) 95
b2 length of the thread (at least) 140
d3 the nominal diameter of the thread M12
z2 length of the ejector 22 Gewinde · ISO 261/262
Steigung P 4
d2 33.402
d3 31.093
Kernloch 32
Spannungsquerschnitt As 816.72 mm² Größenblatt · DIN 797
M42
t the depth of the hole (is not less than) 22
b1 length of the thread (at least) 105
b2 length of the thread (at least) 150
d2 diameter of the screw shank 34
d3 the nominal diameter of the thread M12
z2 length of the ejector 25 Gewinde · ISO 261/262
Steigung P 4.5
d2 39.077
d3 36.479
Kernloch 37.5
Spannungsquerschnitt As 1120.91 mm² Größenblatt · DIN 797
M48
t the depth of the hole (is not less than) 22
b1 length of the thread (at least) 120
b2 length of the thread (at least) 160
d2 diameter of the screw shank 38
d3 the nominal diameter of the thread M12
z2 length of the ejector 28 Gewinde · ISO 261/262
Steigung P 5
d2 44.752
d3 41.866
Kernloch 43
Spannungsquerschnitt As 1473.15 mm² Größenblatt · DIN 797
M56
t the depth of the hole (is not less than) 26
b1 length of the thread (at least) 140
b2 length of the thread (at least) 170
d2 diameter of the screw shank 45
d3 the nominal diameter of the thread M16
z2 length of the ejector 32 Gewinde · ISO 261/262
Steigung P 5.5
d2 52.428
d3 49.252
Kernloch 50.5
Spannungsquerschnitt As 2030.02 mm² Größenblatt · DIN 797
M64
t the depth of the hole (is not less than) 26
b1 length of the thread (at least) 155
b2 length of the thread (at least) 190
d2 diameter of the screw shank 50
d3 the nominal diameter of the thread M16
z2 length of the ejector 36 Gewinde · ISO 261/262
Steigung P 6
d2 60.103
d3 56.639
Kernloch 58
Spannungsquerschnitt As 2675.97 mm² Größenblatt · DIN 797
M72
t the depth of the hole (is not less than) 26
b1 length of the thread (at least) 170
b2 length of the thread (at least) 200
d2 diameter of the screw shank 55
d3 the nominal diameter of the thread M20
z2 length of the ejector 40 Größenblatt · DIN 797
M80
t the depth of the hole (is not less than) 33
b1 length of the thread (at least) 185
b2 length of the thread (at least) 220
d2 diameter of the screw shank 65
d3 the nominal diameter of the thread M20
z2 length of the ejector 45 Größenblatt · DIN 797
M90
t the depth of the hole (is not less than) 33
b1 length of the thread (at least) 205
b2 length of the thread (at least) 240
d2 diameter of the screw shank 70
d3 the nominal diameter of the thread M20
z2 length of the ejector 50 Größenblatt · DIN 797
M100
t the depth of the hole (is not less than) 33
b1 length of the thread (at least) 225
b2 length of the thread (at least) 260
d2 diameter of the screw shank 80
d3 the nominal diameter of the thread M20
z2 length of the ejector 56 Herkunft der Daten
Entwurf — Werte aus einer einzigen Quelle, noch nicht gegengeprüft.
fasteners.eu dimensions, lengths, materials, property classes, current norm, equivalent norms Abgerufen 2026-09-23 · Für Konstruktion und sicherheitskritische Anwendungen die aktuelle Ausgabe der Norm heranziehen.